What Type Of Trusses For Your House:Choose Your Preferable Type

What type of trusses for your

A truss is a structural stand of pillars designed to bridge the space above a room and to provide support for a roof. Trusses usually occur at regular duration, linked by longitude dinal timbers such as purlins. The space between each among each truss is known as a buy.

A truss is a structure consistent of members/elements that takes only tension or contraction, and no bending is induced what so ever. There are many kinds of designable roof trusses and offering unbeatable support.

People use trusses in the house, mainly where there is a requirement for very long spans. Trusses are also used to carry gigantic loads, and sometimes they are used as transfer structures. There are different types of trusses available in the market for houses.

If you want to use trusses for your house, this question might pop up in your mind that, what type of trusses for your house you should buy or use. Here I’m going to tell you about it.

I hope you will get your preferable type after reading it.

Trusses for your house

A truss is a prefabricated wooden structure that integrates a triangular webbing of structural members. To provide support for the roof above meanwhile tying the outside wall of the house together. There are various types of trusses. Like- Pratt, warren, hammerbeam, etc.

Trusses are mainly used in houses for roof framing. It is a structural framework designed to provide strength and support to the roof. The truss is an essential part of the roof frame.

Among so many trusses, selecting the best type of truss is quite challenging. Aesthetic and functionality conditions lead to the considerations of the type of ruff truss which you will select. In this case, costs may vary considerably. But there are other ways to keep expenditures low.

In this article, I have described what type of trusses for your house you should select.

I am pretty sure you will be benefited from it.

Types of trusses

Trusses are an extremely strong, well-accepted, cost-effective alternative for the construction of various systems. An appropriate truss type should be appointed for the design to maximize the efficiency of the configuration (which is often measured in the material used or labor). Today we will examine what types of trusses are out there and how they can benefit your design.)

There are various kinds of trusses available for houses. The most used trusses are-

Pratt truss:

It has been used over the two centuries as an effective truss method. The diagonal members are in tension while the vertical members are in compression. It simplifies and can produce a mire, efficient design. This type of trusses is mostly appropriate for horizontal space.

It has many advantages. The advantages are-


Simple design

Well accepted design

Awareness of peoples behavior

It is best used for where a cost-effective design is needed, a mix of loads & easy configuration is required.

Warren Truss

The Warren Truss is another very excellent truss configuration system and is easily identified by its construction from equilateral triangles. One of the main advantages of this truss is its ability to spread the load evenly across many different members; this is generally for cases when the structure is undergoing a spanned load.


Spreads load fairly evenly between members

Fairly simple

it is best used for Long span structures

Where an evenly allocated load is to be supported

Where a simple structure is required.

K truss

K Truss is a slightly more difficult version of the Pratt truss. Its main difference is that the vertical members have become shortened — improving its resisting against buckling.


Reduced compression in vertical members

Possible reduction in steel and cost if designed efficiently.

Hammer beam Truss

The hammer-beam truss is both complex and dramatic with its open-air center. It requires a skilled eye and the hand of a professional engineer to guarantee its structural integrity. A big advantage of hammer-beam is it doesn’t have a chord.

It can span a vast distance with shorter pieces of wood. It can be a huge asset if you are building with a species in which straight, long timbers aren’t in plentiful supply.

It is a roof that has short horizontal beams attached to the principal rafters in a ceiling. Generally, it’s a truss system.


This type of trusses is used much for supporting open-timbered roofs.

Anyone wants to create a large open space, which isn’t broken up with columns and other vertical support.

Final word

Everything has a positive review and a negative review. The truss also has positive and negative sides. But its positive sides are much than its opposing sides.

Various types of brushes are available nowadays; each of them has multiple qualities. People choose truss for houses as per their choice. But for choosing, they have to know the truss types.

Suppose you have this question on your mind, what type of trusses for your house, then this article is for you. I have discussed it, and I hope you will find out your preferable type after reading it.

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store